Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Elgin, TX
Gate repair in Elgin, TX usually runs between $180 and $900 depending on whether it’s a welded hinge, a misaligned track, or a full operator swap. Elgin’s mix of historic downtown homes and newer ranch-style properties means we work on everything from hand-built iron gates to modern automated driveway systems, and the local clay soil keeps us busy with realignment work. If your gate won’t open, sags on its hinges, or makes a grinding noise when the motor runs, call (254) 280-0629 and a live person will answer.
Why Elgin Homes Are Different
Elgin’s historic downtown and surrounding ranch-style homes often feature custom ornamental gates and automated driveway gates that face a particular set of problems tied to the soil. The expansive clay under Elgin expands when it rains and shrinks during drought. That movement shifts gate posts, throws off opener alignment, and makes a gate that worked fine in May bind up by August. We routinely see gates drop a half-inch after a dry summer, which is enough to strip gears inside the operator. Older properties near downtown may have hand-built gates with non-standard hardware, meaning many repairs need a fabricated part or a welded bracket rather than an off-the-shelf replacement. Newer homes on the outskirts tend to use lightweight aluminum or vinyl gates, which hold up to the soil but are more likely to suffer wind damage during spring storms.
Styles & brands we work with
Our Main Elgin Services
Most Elgin homeowners call us for one of two reasons: a gate that won’t move, or a gate they want replaced or installed fresh. Here’s how each job works in Elgin specifically.
Gate Repair in Elgin
A sagging gate in Elgin is almost always a hinge or post problem, and with clay soil, it’s frequently both. We cut out rusted hardware, weld or bolt in new brackets, and realign the posts before the gate gets re-hung, because fixing the hinge without addressing the shifted post means the gate will sag again within a season. Older downtown gates often need custom hinge work since the original hardware was built by hand and nothing on the shelf matches it. Full details are on our Gate Repair in Elgin page.
Gate Installation in Elgin
New gate installations in Elgin need to account for what the clay soil will do over the next ten years, not just what it looks like on install day. That means deeper post holes, concrete with proper drainage, and a gate frame built to carry the weight of an operator if the homeowner adds automation later. We install swing gates, slide gates, and driveway pedestrian gates, and we quote the price in writing before any materials are ordered. Our Gate Installation in Elgin page covers what a full install includes.
Electric Gate Repair in Elgin
An electric gate in Elgin that won’t respond usually points to one of three things: a shifted post that’s knocked the opener out of alignment, a control board that’s failed from power surges, or a capacitor or limit switch that’s worn out. We diagnose the operator, the loop detector, and the safety edges together, because a gate that opens but won’t close is often a sensor issue, not a motor issue. See Electric Gate Repair in Elgin for what we check and what it costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Elgin
We carry parts and service experience for DoorKing, Elite, LiftMaster, and Mighty Mule operators, and our techs arrive knowing the specific system on your property. Common parts like loop detectors, remotes, and receiver boards are stocked on the truck, which means many Elgin repairs finish in one visit. See our brands for the full range we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Elgin, TX
| Service | Typical range in Elgin |
|---|---|
| Gate hinge replacement or re-welding | $180 – $350 |
| Gate post straightening | $250 – $500 |
| Gate realignment (post shift adjustment) | $150 – $300 |
| Automatic opener motor replacement | $450 – $900 |
| Electric gate wiring repair | $200 – $400 |
| Sensor or safety edge replacement | $150 – $350 |
| Remote or keypad programming | $75 – $150 |
| Full new gate installation (basic swing gate) | $1,200 – $3,500 |
| Full new electric gate with operator | $2,500 – $6,000 |
Elgin’s soil conditions push prices up when a post has shifted more than an inch and needs to be dug out and re-set in fresh concrete with better drainage. You’ll always get a written price before any work starts, and the Kingswell Guarantee is stamped on every repair invoice.
Neighborhoods We Serve in Elgin
We work across the full Elgin area, from the historic streets near downtown to the newer subdivisions on the city’s edges. Most jobs get scheduled within a day or two, and emergency gate failures get prioritized same-day.
- Downtown Elgin historic district
- Brickston
- Elgin Meadows
- Shenandoah
- Knob Creek
Service Area – Cities Near Elgin
Our crews also serve the surrounding communities, so if you’re just outside Elgin or splitting time between properties, we can usually reach you. We handle gate work in Manor, TX, Pflugerville, TX, Round Rock, TX, and Austin, TX.
Serving Elgin, TX - Our Local Coverage Area
We’re based in the Elgin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Elgin
Most non-emergency repairs in Elgin are scheduled within one to two business days. If your gate is stuck open or won’t close and leaves your property unsecured, we treat it as an emergency and get a technician out the same day whenever possible. Call (254) 280-0629 and the person who answers will give you a real arrival window.
Most residential gate repairs don’t require a permit, but new gate installations with concrete work or electrical runs may, depending on the city’s current requirements. We’ll tell you during the estimate whether your project needs paperwork and what it involves. The price you get covers everything we can see before work starts.
Yes. We cover Elgin proper and the surrounding county properties, including ranch gates on county roads and automated entries on acreage. Dispatch is coordinated from our Austin office, and crews run Elgin routes daily. If you’re near Manor, Pflugerville, Round Rock, or Austin, we serve those areas too.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Elgin Customers Say
"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"The gate works great now. Only thing is the first tech couldn't find the wiring fault and they had to send a second guy the next day. Second visit nailed it and they didn't charge me twice."
- Chuck Alderman"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike