Gate Installation in Austin - Written Price, Install Date Set

Trusted Gate Installation for Austin Homeowners

A full gate installation in Austin typically runs $2,800 to $9,500 depending on the gate type, material, automation, and site prep. Most residential driveway gate installations in the Austin area take one to two days on site, with the written price agreed before a single post hole is dug. If your gate is sagging, jammed, or simply gone, call Portcullis Gate Repair Austin at (254) 280-0629. Dean Prescott and our team have been installing and servicing gates across the Austin metro since 2008.

Call (254) 280-0629

We’re an independently owned Kingswell company, which means every installation carries the same four written promises: a price before the work starts, a real arrival window, a clean job site, and a written guarantee on the work. Homeowners in neighborhoods from Round Rock to Pflugerville call us because they want a gate company that shows up and stands behind the job. That’s what we do.

Automatic Gate Installation

Automatic Gate Installation is the process of building and wiring a gate so it opens and closes on its own, using a motorized operator instead of manual pushing or pulling. You need it when you want vehicle access without getting out of the car, or when the gate is too heavy or too long to swing by hand comfortably. Portcullis Gate Repair Austin installs automatic gates for driveways, ranch entrances, and side yards across the Austin area, with most complete automatic gate installations running $4,200 to $9,500 including the operator, safety equipment, and labor.

Operator and Controls

We mount the operator, the motorized arm or gearbox that physically moves the gate, and wire in keypads, remotes, and any vehicle sensors you want. The price for the operator and controls is written before the install starts.

Safety Edges and Photo Eyes

Automatic gates in Austin must reverse if they hit something or if a person walks into the path. We install safety edges and photo eye sensors as standard on every automatic gate job, not as an add-on.

Gate Installation Services

Gate Installation Services cover everything from digging and setting the posts to hanging the gate leaf, mounting the operator, and testing the full system, with Gate Installation pricing that depends on your specific setup. You need it when you’re building a new gate from scratch, replacing one that’s sagging or rusted through, or converting a manual gate to automatic. Portcullis Gate Repair Austin provides full gate installation services across Austin, with most standard single driveway gate installations running $2,800 to $5,500 for a manual gate and $4,200 to $9,500 with automation.

New Builds

We install gates on new properties, coordinating with your fence contractor or handling the full run from posts to opener. We’ll match the gate to your fence style and the grade of your driveway.

Replacements

If your old gate has rusted hinges, a twisted frame, or a post that’s leaning, we remove it and set the new gate properly. In Austin’s clay soil, proper post depth and concrete backfill make the difference between a gate that works for ten years and one that sags in two.

Electric Gate Installation

Electric Gate Installation is the specific work of running power to the gate, installing the operator, and wiring the safety and access controls. You need it when you want the convenience of automatic operation and the security of a gate that closes behind you every time. Portcullis Gate Repair Austin handles electric gate installation for homes and businesses across Austin, with most electric gate installations running $4,200 to $9,500 depending on the operator, the gate size, and the distance from the nearest power source.

Power Runs

We handle the electrical run from your panel or an existing outdoor outlet to the gate location, including conduit and proper weatherproofing. The distance from your power source is one of the biggest variables in the final price.

Access Controls

Keypads, remotes, phone-based entry, and vehicle sensors all get wired and programmed during the electric gate installation. We show you how to use each one before we leave, and the settings are saved so they survive a power outage.

Driveway Gate Installation

Driveway Gate Installation is the design, build, and installation of a gate across your vehicle entrance, whether it swings, slides, or lifts. You need it when you want to control who drives onto your property, keep kids and pets in the yard, or add privacy from the street. Portcullis Gate Repair Austin installs driveway gates across Austin, with most single driveway swing gates running $2,800 to $6,000 for a manual gate and $4,500 to $9,500 automated.

Swing Gates

Swing gates are the most common driveway gates in Austin. They hinge on posts and open inward or outward, and they need level ground and enough clearance to swing without hitting a car or a slope.

Material Choices

Steel, wrought iron, aluminum, and wood all have different price points and maintenance needs in Austin’s heat and occasional freeze. We’ll walk you through the cost and lifespan of each before you commit.

Sliding Gate Installation

Sliding Gate Installation is the installation of a gate that rolls sideways along a track instead of swinging open. You need it when your driveway slopes upward from the street, when you don’t have room for a swing arc, or when the gate is wide and heavy. Portcullis Gate Repair Austin installs sliding gates throughout the Austin area, with most residential sliding gate installations running $3,500 to $7,000 manual and $5,500 to $9,500 with a motor.

Track and Rollers

A sliding gate rides on a steel track and a set of sealed rollers, and that track has to be set dead level or the gate binds. We set the track on a concrete footing and shim it perfectly before the gate ever goes on.

Cantilever and V-Track Options

For driveways with steep approaches or gravel surfaces, a cantilever sliding gate carries its own weight without a floor track that can clog with dirt and Austin’s spring weeds. We’ll tell you which design fits your site.

Gate Opener Installation

Gate Opener Installation is the installation of the motorized unit that opens and closes an existing manual gate, plus the wiring, safety sensors, and access controls. You need it when you already have a gate you like but you’re tired of getting out of the car every time, or when an old opener has failed. Portcullis Gate Repair Austin installs gate openers on existing gates across the Austin metro, with most gate opener installations running $1,800 to $3,800 including the operator, safety equipment, and labor.

Operator Matching

The opener has to be sized to the gate, not the other way around. A gate that’s too heavy for the operator will burn the motor out early, so we measure the gate weight and cycle rate first.

Retrofit Wiring

We run and protect all low-voltage and line-voltage wiring needed to bring an existing manual gate up to automatic. The wiring is hidden in conduit and the connections are weather-sealed against Austin’s humidity and heat.

Gate Fabrication

Gate Fabrication is the custom building of a gate frame, pickets, and hardware to a specific size and design. You need it when your opening is a non-standard width, when you want a specific style that isn’t available off the shelf, or when the gate has to match an existing fence or architectural detail. Portcullis Gate Repair Austin fabricates custom gates for Austin homes, with most custom fabricated gates running $2,800 to $7,500 depending on size, material, and design complexity.

Custom Sizing

Off-the-shelf gates come in standard widths, and Austin driveway openings rarely are. We build to your exact measurements, so the gate fits the opening with consistent gaps on both sides.

Design and Hardware

Spear tops, flat tops, privacy panels, decorative scrolls, and custom hinge and latch hardware are all available. We’ll show you samples and give you a written quote for the gate you actually want.

Brands We Service

We work on DoorKing equipment regularly, from older 9150 and 9100 operators to the newer DKS models. Our technicians know the wiring layouts and common failure points on DoorKing circuit boards, and we can usually pull the right replacement part the same day in Austin.

We also service LiftMaster and Ghost Controls units, including the LiftMaster LA400 and CSL24 series and Ghost Controls swing arm kits. Whether you have Ghost Controls, DoorKing, Elite, Mighty Mule, or any other make, we can help with installation, programming, or repair.

Signs You Need a Pro Right Now

• Your gate sags and drags on the ground. This usually means a failing hinge or a post that’s leaning in the soil. The longer it drags, the more damage it does to the gate frame and the operator motor, which is now working against the ground itself.
• The opener runs but the gate barely moves. That’s often a stripped gear, a burnt capacitor, or a gate that’s binding on its hinges. Continuing to press the remote burns the operator out entirely, and the repair bill grows.
• You hear grinding or screeching when the gate moves. Grinding metal usually means worn rollers or a hinge without grease, and screeching can be the operator’s internal gears. Catching it early is usually a much smaller fix than replacing the whole unit.
• The gate doesn’t stop or reverse when it hits something. In Austin, a gate that doesn’t reverse is a safety hazard, full stop. This usually points to failed safety edges or photo eyes, and it needs attention before someone gets hurt or a vehicle gets pinned.
• Your gate was installed by someone who no longer returns your calls. If the original installer is gone and the gate is failing, you need a company that answers the phone. Portcullis Gate Repair Austin has a live person answering around the clock at (254) 280-0629.

Our Process, Step by Step

1. 1
   You call and we schedule a site visit. We come out, measure the opening, check the grade and the soil, and look at where the power will come from. You get a written quote before any work is scheduled, and that’s the number you pay.
2. 2
   We order or fabricate the gate and hardware. If it’s a custom gate, we build it to the measurements from the site visit. If it’s a standard gate and opener package, we order the exact unit matched to the gate weight and cycle rate.
3. 3
   We set the posts and hang the gate. Posts are set in concrete below the frost line and allowed to cure before the gate goes on. The gate leaf is hung plumb and level, with hinges and hardware torqued to spec.
4. 4
   We install the operator, safety systems, and access controls. The opener gets mounted, wired, and programmed. Safety edges, photo eyes, and any keypads or remotes get installed and tested with the actual gate in motion.
5. 5
   We walk the job with you and hand you the paperwork. You get a demonstration of every control, the written Kingswell Guarantee on the install, and a clean job site. If anything fails within 365 days, we come back and make it right at no charge under the 365-Day Done Right Promise.

How Much Does Gate Installation Cost in Austin?

Our Service Area Near Austin

We install gates throughout the Austin metro, including Round Rock, Pflugerville, Leander, Elgin, Lockhart, Manor, Camp Swift, Lost Creek, Hornsby Bend, Shady Hollow, and Wells Branch. Most Austin city limits jobs get scheduled within a few days. For a complete breakdown of what we offer, see our Gate Installation in Austin page or visit the home page to see the full Kingswell Guarantee in writing.

Frequently Asked Questions About Gate Installation in Austin