Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Austin Homeowners
A gate that won’t open or won’t stay closed isn’t just an inconvenience; it’s a security risk. Portcullis Gate Repair Austin has fixed thousands of gates across Travis County since 2008, and we answer the phone with a live person around the clock. Most driveway gate repairs in Austin are completed same-day, and every job starts with a written price before a single bolt is turned. If your gate is sagging, grinding, stuck, or dead, our Automatic Gate Repair team is ready to help-call (254) 280-0629 and Dean Prescott or one of our background-checked, uniformed technicians will get it moving again.
We’re an independently owned Kingswell company, which means one thing: the Kingswell Guarantee is on every invoice we write. Written price, real arrival window, clean job site, written guarantee. No exceptions. See our home page for the full story, or keep reading to understand exactly what gate repair in Austin involves and what it costs.
Driveway Gate Repair
Driveway Gate Repair is what we do most often in Austin: diagnosing and fixing the gate that controls access to your property, whether it’s a swing gate on hinges or a sliding gate on a track. The two most common calls are a gate that won’t open at all and a gate that reverses or stops mid-travel. Most driveway gate repairs in Austin run $180 – $450 for common fixes like sensor realignment, hinge replacement, or limit-switch adjustment. Full operator swaps, where the motorized opener itself is replaced, typically run $600 – $1,200 parts and labor depending on the brand and gate weight.
Operator Diagnostics
We start with the control board and the power supply before touching anything mechanical. A surprising number of “dead” gates in Austin simply have a tripped GFCI outlet or a failed transformer. When we do find a bad board, we carry replacements for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule on the truck.
Hinge and Alignment Work
Swing gates in Austin’s clay-heavy soil slowly shift out of square as the posts move. We re-shim hinges, perform Gate Realignment on posts where possible, and reset the operator’s open and close limits. The goal is a gate that closes fully against the stop every single time, not one that bounces back or leaves a gap.
Styles & brands we work with
Gate Welding
Gate Welding is the structural repair of metal gates and frames where bolts alone won’t hold. When a weld cracks at a hinge point, a picket snaps at the rail, or a post base rusts through, the right fix is cutting out the failed section and welding in new steel. In Austin, gate welding jobs typically run $150 – $500 depending on the location of the break, the metal thickness, and how much disassembly is needed to reach the joint safely.
Cracked Hinge Welds
Hinge welds carry the full weight of the gate every time it cycles. We grind out the old weld, re-set the hinge with the gate properly supported, and lay a full-penetration weld rather than a surface bead-part of our thorough Hinge & Post Repair process. After welding, we cycle the gate several times and re-check the gap for any drift.
Picket and Rail Repairs
Broken pickets on iron and steel gates in Austin usually fail at the bottom rail where water collects. We cut the damaged section, weld in matched material, and finish the repair. For ornamental work we match the profile as closely as the available stock allows and tell you plainly if it will be visible.
Commercial Gate Repair
Commercial Gate Repair covers the heavier, higher-cycle gates used at apartments, office parks, warehouses, and gated communities across Austin. These systems run hundreds of cycles a day, so failures are usually mechanical: worn rollers, broken chains, burned-out motors, or safety loops that stop detecting vehicles. Commercial gate repair in Austin typically runs $300 – $800 for common mechanical fixes like roller replacement or chain tensioning; full operator replacement on a commercial slide gate runs $1,200 – $2,500 depending on horsepower and access control integration.
Slide Gate Mechanical Work
Commercial slide gates in Austin eat rollers and bearings. We replace worn rollers, re-align the track, tension or replace drive chains, and set the end stops properly. A commercial gate that grinds is telling you the rollers are done; ignoring it takes out the chain next and the motor after that.
Access Control Integration
We work with existing keypads, card readers, and telephone entry systems, and also handle Lock Repair when the mechanism itself is at fault. If the gate operator is fine but the property’s access system isn’t triggering it, we trace the circuit and identify whether the fault is in the loop detector, the reader, or the operator’s control board. The price is still written down before we start, same as every job.
Iron Gate Repair
Iron Gate Repair in Austin usually means addressing rust, sag, or broken joints on decorative and standard iron gates. Austin’s humidity and occasional ice storms are not kind to iron. Most iron gate repairs run $200 – $600 depending on whether we’re replacing hinges, welding broken sections, or straightening a sagging frame. A full rust treatment with priming and repainting adds $150 – $350 depending on gate size.
Rust Remediation
We wire-brush the affected area, treat it with a rust converter, and prime before paint. The goal is stopping the corrosion, not hiding it. If the rust has thinned the metal to the point of flaking, we’ll tell you honestly whether patching or replacing the section makes more sense than trying to weld to weakened material.
Sag Correction
Most sagging iron gates in Austin have either a stretched cable or a failing turnbuckle, or the posts themselves have shifted. We diagnose the cause rather than just tightening whatever’s loose. On gates with an anti-sag truss, we adjust the rod and plate properly; on gates without one, we may recommend adding one.
Sliding Gate Repair
Sliding Gate Repair covers the cantilever and track-style gates that roll sideways instead of swinging. We see more sliding gate failures in Austin’s newer developments where cantilever gates are common on long driveways. Typical sliding gate repairs run $200 – $500 for roller, guide, or limit issues; a full operator replacement on a residential slide gate runs $650 – $1,300 installed.
Cantilever Roller Replacement
Cantilever gates ride on rollers housed inside the gate frame. Those rollers wear out, seize, or develop flat spots over time. We replace them in matched sets, never just the one that failed, and we adjust the gate’s balance so the new rollers don’t carry uneven load.
Track Cleaning and Guide Adjustment
Track-style sliding gates in Austin collect gravel, leaves, and dirt. We clear the track, check guide rollers for alignment, and adjust the operator’s force settings. A gate that shudders while it moves is usually fighting debris or a misaligned guide, not a dying motor.
Wrought Iron Gate Repair
Wrought Iron Gate Repair is the specialized restoration and structural repair of ornamental wrought iron gates, which are common in Austin’s older neighborhoods like Hyde Park, Clarksville, and Travis Heights. True wrought iron is less common than steel made to look like wrought iron; we work on both. Wrought iron gate repair in Austin typically runs $250 – $700 depending on the amount of decorative scrollwork, the condition of the metal, and whether we need to fabricate replacement sections.
Decorative Scroll Repair
Broken scrolls and twisted ornamental elements often can’t be bought off the shelf. We fabricate matching pieces where possible and weld them in place. If a section is too far gone or too intricate to reproduce, we tell you before starting the work, with the written price adjusted accordingly.
Painted Finish Matching
After welding on painted wrought iron, we prime and paint the repair area. Wrought iron fences and gates in Austin usually use a satin black or oil-rubbed bronze finish. We match the existing sheen as closely as possible and let you know if a full repaint is the better long-term call.
Metal Gate Repair
Metal Gate Repair covers steel, aluminum, and tubular metal gates found throughout Austin’s suburbs. These gates fail in predictable ways: welds crack, posts loosen, hinges wear egg-shaped, and the bottom rail rusts where sprinkler water hits it. Metal gate repair in Austin typically runs $150 – $450 for hinge and alignment work; more involved structural repair with welding runs $250 – $600.
Aluminum Gate Specifics
Aluminum gates don’t rust, but they crack at stress points and can’t be welded with standard steel rod. We use aluminum-specific filler and clean the joint properly. We also check for galvanic corrosion where steel hardware meets aluminum, a common issue on Austin gates near pools.
Post and Footing Issues
A leaning metal gate usually means the post has moved, not the gate. We re-set posts in concrete where needed, or install deeper footings if the original pour was too shallow for Austin’s expansive soil. The gate itself is often fine once the post is plumb again.
Wood Gate Repair
Wood Gate Repair is the structural and mechanical repair of wooden driveway and garden gates, which are popular in Austin’s older central neighborhoods and acreage properties. Wood moves with every change in humidity, and Austin’s wet-dry cycles tear gates apart over time. Typical wood gate repair runs $150 – $400 for hinge, latch, and brace work; a full gate rebuild with new lumber runs $400 – $900 depending on size and species.
Frame and Brace Repairs
Most sagging wood gates in Austin are missing a diagonal brace or running the brace the wrong direction. We rebuild the frame with the brace running from the bottom hinge-side corner to the top latch-side corner, which carries the weight in compression. The difference is immediate and it’s something you can check on your own gate right now.
Hardware Replacement
We use heavy-duty gate hinges and latches, not fence hardware. A wood gate that drags or won’t latch is often wearing hinges designed for a lighter load. We also pre-drill every hole and use exterior-grade screws so the wood doesn’t split at the fasteners.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We service nine major gate-operator brands, and our technicians arrive already knowing the specific system on your property. That means less diagnostic time and fewer wrong guesses on your invoice. For Ghost Controls and Mighty Mule, the most common operators on Austin acreage and ranch gates, we stock OEM remotes, control boards, and limit switches on the truck. We know the specific failure modes of each generation, from battery-drain issues to sensor misalignment after a storm.
For DoorKing and Elite, the two most common brands on Austin commercial and HOA gates, we carry the loop detectors, keypads, and high-cycle wear parts that fail after years of daily use. We’ve worked on DoorKing slide operators in Round Rock office parks and Elite swing operators on Pflugerville community entrances. Whether you have one of these brands or any other make, we can help. See our Gate Repair in Round Rock and Gate Repair in Pflugerville pages if you’re located north of the city.
Signs You Need a Pro Right Now
- The gate hesitates or stops mid-travel. This usually means a failing limit switch or a worn gear. Every extra day of use puts more wear on the operator motor, and the repair gets more expensive the longer it runs like this.
- The gate grinds or screeches when it moves. Grinding is metal-on-metal contact from worn rollers, bearings, or a dry chain. The noise is the early warning; the seized component in the middle of the night is the event.
- The gate sags and drags on the ground. Sag means the hinges, posts, or frame have lost their integrity. Dragging wears the operator down quickly and can burn out a motor that was in fine shape.
- The gate reversed and pinned something against a post. This is a safety-edge or obstruction-sensor failure. If your gate’s safety system isn’t working, the gate is unsafe to operate, period. Call us before someone gets hurt or a vehicle gets damaged.
- You’re holding the remote against the windshield to get it to work. Weak signal usually means a failing receiver, a bad antenna connection, or interference. A pro with the right diagnostic tools can sort it out in one visit instead of three guesses.
Our Process, Step by Step
We follow the Kingswell Way on every job, which means five plain-English commitments: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails.
- 1
You call and a live person answers. No voicemail trees, no callback queues. We ask what the gate is doing, what brand the operator is, and whether it’s a swing or slide. We schedule a real arrival window, not a four-hour block.
- 2
The technician arrives in uniform and diagnoses the problem. We test the power supply, the control board, the safety edges and photo eyes, and the mechanical components. We use multimeters and diagnostic modes built into the operator to identify the exact failure rather than replacing parts on a hunch.
- 3
You receive a written price before any work starts. The quote covers parts and labor. You approve it first. If the diagnosis changes mid-repair, we stop and get your approval again with updated numbers.
- 4
We fix the gate and test the full cycle. We run the gate through open, close, obstacle detection, and auto-close functions. We adjust force settings to manufacturer spec, not just what “seems to work.”
- 5
We hand you the written Kingswell Guarantee. Every repair carries a 365-Day Done Right Promise. If the repair fails inside 365 days, we come back and fix it at no charge. The guarantee is stamped on the invoice before we leave your driveway.
How Much Does Gate Repair Cost in Austin?
Gate repair in Austin typically falls between $180 and $800 for most mechanical and electrical repairs, with full operator replacement running $600 to $2,500 depending on the gate size, brand, and access control setup. A standard hinge replacement or sensor realignment on a residential swing gate runs $180 – $350. A control board replacement runs $250 – $500. A commercial-grade slide gate operator replacement runs $1,500 – $2,500 installed.
What affects the price: the weight and length of the gate, the brand of operator, whether the failure is mechanical or electronic, and whether access control components need to be re-wired. Heavier gates need bigger operators and stronger hinges, and that’s reflected in the parts cost. What doesn’t affect the price: how much your house is worth, what kind of car is parked behind the gate, or how stressed you sound on the phone.
To avoid overpaying, get the diagnosis before you get the quote. A company that names a price before looking at the gate is guessing. A company that opens the operator, tests the board, checks the safety loop, and then writes a price is doing it right. Our free estimate includes the diagnostic work, the written price, and a plain explanation of what failed and why. For related work, see our Gate Repair in Austin page or ask about electric gate repair when you call.
Our Service Area Near Austin
We cover the entire Austin metro, including Round Rock, Pflugerville, Leander, Elgin, Lockhart, Manor, Camp Swift, Lost Creek, Hornsby Bend, Shady Hollow, and Wells Branch. Response time in most close-in neighborhoods is same-day; outlying areas like Lockhart and Elgin are usually next-day depending on the call volume. We schedule a real arrival window, not a vague range. If you’re reading this from north of the river, check our Gate Repair in Round Rock page for details specific to Williamson County.
Serving Austin, TX - Our Local Coverage Area
We’re based in the Austin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in Austin
Gate repair is the diagnosis and correction of mechanical, electrical, or structural failures on automatic and manual gates, including the operator, hinges, rollers, tracks, safety systems, and the gate frame itself. In Austin, most gate repair work involves either the operator electronics or the mechanical wear points. Portcullis Gate Repair Austin handles everything from a dead remote to a sagging frame, all with a written price before work starts.
Most residential gate repairs in Austin are done in one to three hours on the same visit. Repairs that require welding or post re-setting can take four to six hours, or require a second visit if new concrete needs to cure. We’ll tell you the expected time when we give you the written price, and we don’t leave a gate open at night.
Gate repair in Austin runs $180 – $450 for most common residential fixes like hinge replacement, sensor realignment, or limit switch adjustment. Operator replacement runs $600 – $1,200 on residential gates and $1,200 – $2,500 on commercial systems. Every job gets a written price before we start, so the final invoice matches the approved quote. Call (254) 280-0629 for an exact quote; estimates are free.
Yes, we service Ghost Controls and Mighty Mule operators on a weekly basis across Austin and the surrounding counties. We stock OEM remotes, control boards, and limit switches for both brands on the truck. Our technicians also know the specific firmware quirks and battery-drain issues that affect each generation, so we fix them right the first time.
Yes, we answer calls 24/7 with a live person, including holidays. A gate stuck open is a security problem; a gate stuck closed is an access problem. Either way, we treat it as urgent and dispatch a background-checked, uniformed technician as quickly as the schedule allows, usually same-day in Austin.
Every repair from Portcullis Gate Repair Austin carries the Kingswell Guarantee: a written 365-Day Done Right Promise on the invoice. If the repair fails inside that period for any reason, we come back and fix it at no charge, including the return visit. That’s a written promise, not a verbal one, and it’s the same standard across every Kingswell company.
Clear the area around the gate so the technician can work safely, and have the operator brand and model handy if you know it. If the gate is stuck closed and the technician can’t reach it, have the manual release key ready. Beyond that, there’s nothing to prepare; we bring the tools, the parts, and the written price.
Schedule Your Gate Repair Service in Austin Today
Call (254) 280-0629 and you’ll talk to a live person who can schedule your service and answer questions about your gate. Every repair carries the 365-Day Done Right Promise and a written price before any work starts. No pressure, no surprises, just a gate that works. That’s the Kingswell Way.
Written by Dean Prescott, Owner at Portcullis Gate Repair Austin, serving Austin and Central Texas since 2008.