Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lockhart, TX
Lockhart’s gates do a lot of work. They hold back heat, cattle, and the occasional summer downpour, and they do it while sitting on soil that swells in spring and bakes hard by August. A gate company in Lockhart, TX has to understand that mix: century-old ornamental iron near the square, newer aluminum driveway gates in the subdivisions, and the kind of heat that warps metal and dries out wood faster than most people expect. We’re Portcullis Gate Repair, a Kingswell company, and we work across Lockhart with one promise on every job: a written price before any work starts. If your gate is sagging, sticking, or refusing to open, call (254) 280-0629 and a real person will answer.
Why Lockhart Homes Are Different
Lockhart’s housing stock splits into two very different worlds. Near downtown you’ll find Victorian and early 20th-century homes with ornamental metal and wood gates that have been swinging on their hinges since before air conditioning. Many of those gates are original to the house, with hand-forged hinges and latches you won’t find at a box store. Repairing them means matching the character of the ironwork while correcting decades of settling in the stone or brick piers. A general fence company will often replace what should be restored; we’d rather rebuild the hinge and keep the gate.
On the outskirts, newer developments use standard aluminum or steel driveway gates. Those jobs are less about preservation and more about automation, alignment, and dealing with ground movement. Central Texas soil expands and contracts through freeze-thaw cycles in winter and long dry stretches in summer, which slowly pushes gate posts out of square. Add summer storms that blow debris into tracks and hinges, and you get a steady stream of gates that worked fine in May but won’t close by July. That’s the reality of Lockhart gate work: the calendar is as much a factor as the hardware.
Styles & brands we work with
Our Main Lockhart Services
Most calls we get in Lockhart come down to two things: a gate that has stopped working, and a gate that was never installed quite right in the first place. Here’s how we handle both, plus the electric side of the trade.
Gate Repair in Lockhart
When a gate in Lockhart starts dragging on the ground or latching at the wrong angle, the cause is usually pier settling, a worn hinge, or a post that has drifted out of level. We start by looking at how the gate sits in its opening, then work through the hardware, track, and posts. On older homes near downtown, we’ll preserve original iron and wood wherever it’s sound, fabricating replacement parts only when the existing piece can’t be salvaged. For specifics on repair costs and what a typical Lockhart repair visit looks like, see Gate Repair in Lockhart.
Gate Installation in Lockhart
A new gate in Lockhart has to survive both the soil and the style of the street it’s on. In the historic district, that often means a custom design that respects the home’s age rather than fighting it. In newer developments, it usually means a properly set steel post and an actuator-ready frame that will stay square as the ground moves. We measure, order, and build to the site, and we give you a written price before anything is ordered. For the full walkthrough of materials, lead times, and what a Lockhart installation actually includes, see Gate Installation in Lockhart.
Electric Gate Repair in Lockhart
Most electric gates in Lockhart fail at the operator, the safety sensors, or the power supply, and summer heat is hard on all three. We train our technicians on nine major operator brands including FAAC, BFT, Linear, and Viking, so the person who arrives already knows the system on your property rather than learning it from the manual in your driveway. We diagnose first, then quote, then repair only with your approval. To see how we break down electric gate problems and what typical fixes run, see Electric Gate Repair in Lockhart.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lockhart
We service and stock parts for the gate operators Lockhart homeowners actually have: FAAC, BFT, Linear, and Viking are the ones we see most often, and our technicians are trained across nine brands total. Because we carry common boards, arms, and safety components on the truck, many repairs in Lockhart are finished the same day. See our brands for the complete list of systems we know well.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lockhart, TX
| Service | Typical range in Lockhart |
|---|---|
| Service call / diagnostic visit | $75 – $125, applied toward the repair |
| Steel or aluminum driveway gate repair | $225 – $550 |
| Wood gate repair (rail or picket replacement) | $200 – $475 |
| Hinge replacement (standard residential) | $150 – $350 per pair |
| Gate post reset or reinforcement | $250 – $600 |
| Cantilever gate roller replacement | $200 – $400 |
| Gate opener / actuator swap | $550 – $1,200 |
| Circuit board / control panel replacement | $350 – $850 |
| Safety sensor or photo eye replacement | $150 – $300 per pair |
| Track and wheel assembly replacement | $300 – $700 |
| Full gate installation (standard residential) | $1,800 – $4,500 |
What pushes a Lockhart price toward the top of these ranges is usually pier settling on older homes, rusted or hand-forged hardware that needs fabrication, and the extra labor of working around historic masonry. But whatever the number is, you’ll see it in writing before a single bolt is turned. That’s the Kingswell Guarantee, and it applies to every job we do in Lockhart.
Neighborhoods We Serve in Lockhart
We run repair calls all over Lockhart, from the streets immediately around the courthouse square out to the newer subdivisions on the edges of town. Here’s a representative sample of where we’re working in a typical month:
- Lockhart Square and the surrounding historic district
- The neighborhoods north of SH-142
- Subdivisions along the southern edge off US-183
- The newer developments west of downtown
- Rural acreage properties just outside city limits, past the Lockhart city line
For most repair calls inside Lockhart city limits, we can have a technician on site the same day or the next morning, depending on when you call and what parts the job is likely to need.
Service Area – Cities Near Lockhart
Our crews serve Lockhart and the surrounding towns, including Austin, TX to the northwest, Manor, TX and Elgin, TX to the north, and Pflugerville, TX further up the corridor. If you’re just outside the Lockhart city boundary, call us and we’ll tell you straight whether our technicians can get to your address on the regular schedule.
Serving Lockhart, TX - Our Local Coverage Area
We’re based in the Lockhart area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lockhart
For most repair jobs inside Lockhart, we can arrive the same day or the next morning. Emergency calls are answered around the clock, and we’ll give you a real arrival window when you call, not a four-hour guess. Call (254) 280-0629 and the dispatcher will tell you exactly what’s available.
Most residential gate repairs and like-for-like replacements don’t require a permit in Lockhart, but new driveway gates and anything that changes the structure of a fence line can trigger review, especially on historic-property streets near the square. We’ll check the current Lockhart requirements before the job starts and tell you if anything needs to be filed.
Yes. We take care to preserve original hand-forged hinges, latches, and ironwork when we can, and we fabricate replacements that match rather than swapping in modern hardware that looks out of place. The repair still carries the same 365-Day Done Right Promise as every other job we do in Lockhart.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lockhart Customers Say
"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"The gate works great now. Only thing is the first tech couldn't find the wiring fault and they had to send a second guy the next day. Second visit nailed it and they didn't charge me twice."
- Chuck Alderman"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike