A Portcullis company - serving Austin, TX

Ghost Controls Gate Repair in Round Rock, TX

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Gate Repair in Round Rock, TX | Portcullis Gate Repair Austin

If your Ghost Controls opener is beeping but the gate won’t budge, or the arm swings past the post every third cycle, we can usually diagnose it over the phone and have a tech out same day. We’re Portcullis Gate Repair Austin, an independent Ghost Controls service provider covering Round Rock, TX, and we open more than 200 Ghost Controls systems a year across this city. The short answer: most Ghost Controls repairs in Round Rock run $185 – $420 parts and labor, with a written price quoted before we turn a single bolt. Call (254) 280-0629 and tell us what the gate is doing, and we’ll give you a real number, not a vague estimate.

Why Round Rock Residents Choose Us for Ghost Controls Service

We’re not a manufacturer hotline, and we’re not an authorized warranty center. We’re the independent crew Round Rock homeowners call when they want the problem fixed without the runaround and without voiding the appearance rules their HOA enforces. Dean Prescott, our owner, learned the gate trade at Los Angeles Trade-Technical College, spending years on electrical theory, welding, and the mechanical side of how operators actually fail when a Texas summer hits. What that means for you is simple: we already know which Ghost Controls parts fail in Round Rock before we roll up the driveway.

Every technician arrives in uniform, background-checked, and carrying OEM Ghost Controls parts for the common failures we see weekly: limit switches, battery harnesses, armature motors, and photo-eye sensors. We also stock aftermarket sealed-limit switches and higher-capacity batteries that survive Round Rock humidity better than the original components on older AXDP and TSS1 units. Our Ghost Controls sales & service work comes with the 365-Day Done Right Promise: if the repair fails inside a year, we return at no charge, written on the invoice.

Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Common Ghost Controls Gate Repair Problems We Solve in Round Rock

These are the five failures we see most often in this city, and each one has a Round Rock fingerprint on it:

  • Limit switch drift after freeze-thaw cycles. Round Rock winters rarely stay cold for long, but the temperature swings are enough to move a limit switch on an uninsulated gate arm. Your gate stops two feet short of the post, or it overtravels and pops out of the latch. We replace or recalibrate the switch and set the limits to allow for the expansion we know is coming next January.
  • Corroded battery terminals in the control box. Ghost Controls battery backup kits keep the gate working during a power blip, but Round Rock’s humidity and brief thunderstorms take a toll on the terminal connections. The gate starts resetting itself at odd hours. We clean or replace the harness, then seal the box so the next storm doesn’t repeat the failure.
  • Obstruction sensor false positives from oak leaves. Spring wind events blow live oak leaves against the photo-eye lens, and the gate reverses as if a child is in the path. It’s a safety feature doing its job, but it’s maddening when it happens every afternoon. We reposition or shroud the sensors so leaf litter doesn’t trigger false obstructions.
  • Motor gear stripping on heavy ornamental gates. In open lots like Teravista and Stone Canyon, a lightweight Ghost Controls operator gets asked to push a 400-pound iron gate against steady spring winds. The plastic gear strips, the motor hums, and the gate doesn’t move. If the gate exceeds 350 pounds, we usually recommend a full operator replacement with a higher-torque unit rather than rebuilding a gear that will strip again.
  • Swing gate binding at the hinge post. Round Rock’s limestone-heavy clay soil moves with the seasons. Dry summers shrink it, wet winters swell it, and the concrete footing shifts just enough to bind the gate. It’s a soil problem disguised as a gate problem, and most people in sandy-soil suburbs like Pflugerville never see it.

Ghost Controls Service in Round Rock: What Local Conditions Mean for Your Equipment

Here’s the thing about Round Rock that doesn’t show up on a generic Ghost Controls troubleshooting page. The limestone-heavy clay under this city doesn’t hold still. After a dry summer, the soil contracts and the concrete footings that anchor swing gate hinges shift, sometimes by half an inch or more. That’s enough to throw a Ghost Controls photoelectric sensor out of alignment, causing the gate to stop halfway and reverse without any visible obstruction. We find this on homes throughout Round Rock, especially in neighborhoods built on fill ground like parts of Teravista and Forest Creek, where the soil was cut and compacted during original construction. Our crew responds by re-setting the sensor alignment and, when needed, shimming the hinge post to compensate for seasonal movement. No one in a sandy-soil suburb like Pflugerville deals with this the way Round Rock does. It’s the first thing I tell a customer whose Ghost Controls gate worked fine in April and won’t close in September.

Ghost Controls Models & Products We Service in Round Rock

We work on the full Ghost Controls residential lineup, and we arrive already knowing which box and which board is in your driveway. The AXDP heavy-duty dual-gate opener is the one we see most on the wide driveways common in Round Rock’s newer subdivisions. The TSS1 single swing gate opener shows up on older ranch homes near downtown and on custom side gates. The DP2 dual gate opener is the mid-range workhorse we service across the city. We also install and repair Ghost Controls battery backup kits, which matter more in Round Rock than most places, given how often storms knock out power in spring.

Our parts logic is simple. If the operator is less than five years old, we install OEM Ghost Controls parts, period. If it’s an older AXDP or TSS1, we may recommend aftermarket sealed-limit switches or a higher-capacity battery that handles Round Rock humidity better than the original spec. We’ll say so before we order anything.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ghost Controls Service Pricing in Round Rock

Here’s what we tell every Round Rock customer before we leave the shop, and Dean says it exactly this way: “Tell me what it’s doing wrong, and I’ll tell you what it costs to fix it, before I pull out a single tool.” That’s not a slogan. It’s how we quote. Most Ghost Controls service calls in Round Rock come out between $185 and $420 parts and labor. Limit switch replacement typically runs $185 – $280. Battery harness repair and terminal replacement, $160 – $240. Motor gear rebuilds start around $240, but if the gate is over 350 pounds, we’ll quote an operator replacement instead because rebuilding a gear that’ll strip again is a lousy way to earn your trust. A full TSS1 or DP2 operator swap runs $650 – $1,150, depending on the gate’s weight and wind load. Every quote is written, priced before any work starts, and guaranteed for 365 days under the Done Right Promise. Call (254) 280-0629 for a free estimate, and we’ll give you the same numbers over the phone if you can describe the symptom.

Serving Round Rock, TX - Our Local Coverage Area

We’re based in the Round Rock area and offer Gate Repair in Round Rock, so we know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs – Ghost Controls Gate Repair in Round Rock

Service Areas Near Round Rock

We cover Round Rock and the surrounding communities where Ghost Controls gates are standard equipment. Our crew runs service calls throughout Round Rock service area daily, and we cross city lines every week for customers in Ghost Controls service in Pflugerville, including homes with very different soil conditions. We also cover Ghost Controls service in Austin, along with Leander and parts of Elgin. If you’re in a gated community near Round Rock and the operator quits, call us. We’ll tell you honestly whether it’s a fifteen minute fix or a full replacement.

Book Your Ghost Controls Service in Round Rock Today

If the gate beeps, whines, or won’t open, call (254) 280-0629 now. We answer live, 24 hours a day, seven days a week. We’ll ask what the gate is doing, give you a written price before we arrive, and show up in the window we committed to. Round Rock gates don’t fix themselves, but we do.

Written by Dean Prescott, Owner at Portcullis Gate Repair Austin, serving Round Rock since 2008.

Need Gate Repair help in Round Rock? Licensed & insured · 1-hour response · free estimates
Call (254) 280-0629
Local Service Coverage

Request a Free Estimate in Round Rock

Tell us what you need - Portcullis Gate Repair Austin responds fast. No obligation.

By submitting this form, you agree to our Privacy Policy and agree to be contacted through phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Text Now
Call Now - 24/7 Dispatch