Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHinge & Post Repair in Austin, TX
Hinge and post repair fixes the two points where your gate carries all its weight: the hinges that let it swing and the posts that hold it in the ground. In Austin, we replace worn hinge pins, weld cracked hinge brackets, and reset posts that have been pushed out of plumb by shifting soil, heavy winds, or years of the gate’s own weight working against them. If your gate drags on the ground, leans back and won’t close, or the hinges groan every time you open it, call Portcullis Gate Repair Austin at (254) 280-0629. We’re the local team behind Gate Repair in Austin, and hinge and post work is one of the most common jobs we do.
We’re an independently owned Kingswell Gate Repair company, which means every hinge replacement or post reset we do comes with the same written guarantees as every other Kingswell job across the country. That’s the point. You get a real dollar price before we touch a bolt, a real arrival window we hold to, and a written guarantee that covers the repair for 365 days. Dean Prescott owns this location and sees to it that the Kingswell way applies to every truck we send out.
Key Takeaways
- Hinge and post repair in Austin typically runs $240 – $560 for a standard single-swing gate, with full post replacements in concrete running $700 – $1,400 depending on access and soil conditions.
- Most hinge and post repairs are completed same day or next day, depending on whether we need to pour concrete for a post reset.
- We give a written price before any work starts, and every repair carries the 365-Day Done Right Promise.
- We service gates built on Ghost Controls, DoorKing, Elite, and Mighty Mule operators, so the tech you get already knows your system.
- Call (254) 280-0629 any time. A live person answers, day or night.
When You Need Hinge & Post Repair
Austin’s clay-heavy soil expands when it rains and contracts during long dry spells. That cycle heaves posts out of plumb faster than most people expect, and a gate that was level in April can be dragging across the driveway by August. Here’s what tells us it’s time to take a close look:
- The gate drags or scrapes along the ground on the latch side. That means the hinge-side post has tilted back or the gate has settled on its hinges. In neighborhoods like Mueller or Circle C, we see this often after heavy spring rain followed by a dry July.
- The gap between gate and latch post is wider at the top than the bottom, or vice versa. That’s the post moving out of vertical, and it will get worse until the latch stops catching altogether.
- The gate sags visibly and you can lift the latch end up and down by hand. Play at the hinge usually means a worn pin, an egged-out hinge barrel, or a cracked weld. On heavy ornamental steel gates, a cracked hinge bracket is not a “watch it for a while” problem. It’s a failure waiting for the next strong wind gust.
- The gate groans, pops, or shudders as it swings. Some of that is the operator (the motor), but when the noise tracks with the gate’s movement rather than the opener, the hinge is usually the culprit.
- A post is visibly leaning, cracked, or rusted through at the base. This is common on older driveway gates around Tarrytown and Brentwood, where posts were set years ago without proper drainage. A rusted-through post can snap without warning.
- The operator is working, but the gate refuses to latch or trips its safety stop. The control board reads the extra resistance and assumes something is in the way. In most cases, the gate is out of alignment at the hinges or the post has shifted.
If any of that sounds like your front gate or driveway gate, call (254) 280-0629 and describe what you see. We’ll tell you over the phone whether you need a service call or whether it’s something simple enough to adjust on your own. That’s how we open every conversation: real answers first.
Our Hinge & Post Repair Process
We don’t show up and start disassembling your gate. We work in the same order every time, and you know the price before step one. Here’s the process Dean and the crew follow on hinge and post jobs in Austin:
- On-site inspection with measurements. We check the post for plumb with a level, inspect each hinge for pin wear, barrel egging, weld cracks, and rust-through, and watch the gate move under power if it has an operator. We take measurements and photos so you can see what we see.
- Written quote before any work begins. We hand you a printed price for the hinge replacement, post reset, bracket weld, or any combination of the three. That price includes parts, labor, and any concrete or hardware we’ll need. If the gate needs a different fix than what you thought, the quote reflects the real repair, not a guess.
- Hinge replacement or bracket welding. Worn pins come out and new pins (or complete hinge assemblies) go in. Cracked hinge brackets on steel gates get welded and ground smooth, then primed and painted to match. On wood gates, we replace the hinge hardware and reinforce any split framing at the hinge point.
- Post reset or replacement. For a post that’s leaning but structurally sound, we dig around the base, square it up with braces, and pack it with concrete to grade. For rusted-through or cracked posts, we set a new post at the correct depth for Austin’s soil and frost line, then let the concrete cure before hanging the gate back.
- Alignment, operator check, and test cycles. Once the gate is hanging square, we run it through full open and close cycles (manually and with the operator, if there is one). We adjust the travel limits, the safety stops, and the latch so everything works without strain.
- Written guarantee before we leave. Every repair gets a Kingswell Guarantee in writing that covers our work for 365 days. If the repair fails inside that year, we return and fix it at no charge under the 365-Day Done Right Promise.
Hinge & Post Repair Pricing in Austin
Hinge and post repair in Austin typically costs $240 – $560 for a standard single-swing residential gate, and $700 – $1,400 when a post has to be fully replaced and set in new concrete. The spread comes down to three things: how much of the existing hardware can be saved, what kind of post you have, and whether the Automatic Gate Repair operator needs to be re-tuned after the gate is rehung.
Here’s what those ranges look like as actual line items so you can plan realistically:
| Repair | Typical Price Range (Parts + Labor) |
|---|---|
| Hinge pin replacement (single gate, standard hardware) | $240 – $380 |
| Weld repair on cracked hinge bracket (steel gate) | $300 – $520 |
| Post straightening and re-packing (post still sound) | $350 – $560 |
| Full post replacement set in concrete (single gate) | $700 – $1,400 |
| Operator re-alignment and travel limit adjustment after hinge/post work | $180 – $320 |
The big variable in Austin is the post. A steel post in good shape that has just tilted can often be straightened and re-packed for a few hundred dollars. A post that has rusted through at the base, or one set in shallow concrete that’s cracked and heaved, needs to come out. On some older West Austin homes and through much of Round Rock and Cedar Park, gates were set on posts stuck into the soil with barely a bag of concrete. Those always need a proper footing, and that’s the higher end of the range.
We never charge by the hour with an open-ended tab. You get a written price before any work begins, and that price holds. If we find something mid-repair that changes the scope (a second cracked hinge, for example), we stop and show you before we spend another dollar. That’s the Kingswell Guarantee at work: written price, real arrival window, clean job site, and written guarantee on the repair.
And if your gate is on an operator (a motorized opener), we tune it after the hinge and post work is done. Many companies replace the hardware and mark the job complete without ever re-setting the travel limits, which leaves the gate slamming or failing to close. We don’t; we run full test cycles before we pack up. That work is reflected in the range above, and if it’s not needed, there’s no charge for it.
The best way to get an exact number is to call us at (254) 280-0629 and describe the gate and the post. Dean or a technician on the other end can usually give you a working range over the phone. Estimates are free, and the written quote you get on-site is the price you pay. No after-the-fact surprises, no upcharge once we have the gate halfway apart.
FAQs – Hinge & Post Repair
How much does hinge and post repair cost in Austin?
A basic hinge replacement on a standard single-swing gate runs $240 – $380, and a full post replacement with new concrete runs $700 – $1,400. The exact number depends on the condition of your post, the type of hinges, and whether the gate has an operator that needs re-tuning. Call (254) 280-0629 for a free estimate and a written price before any work starts.
Can you fix a leaning gate post without replacing it?
Yes, in most cases a leaning post can be straightened and re-packed in new concrete for $350 – $560, as long as the post itself isn’t rusted through or cracked and doesn’t need Lock Repair. If the base is compromised, replacing the post is the safer fix and actually costs less over the long run, since a straightening alone won’t hold up against Austin’s clay soil movement.
How long does hinge and post repair take?
Most hinge repairs and basic post re-packing are done in 2 to 4 hours. A full post replacement requires concrete to cure, which is typically an overnight job: we set the post the first day and hang the gate the next. For same-day or emergency repairs, call (254) 280-0629. A live person answers 24/7, and we’ll tell you honestly whether we can get there today.
Do I need to replace my gate operator after hinge or post repair?
No, in most cases the operator is healthy and just needs its travel limits re-adjusted after the gate is rehung so it doesn’t slam or over-travel at the stops. If the operator was stressed by a sagging gate for months or the control board is original to an older DoorKing or Elite unit, we’ll tell you during the inspection, but we don’t push replacement when a tune-up solves it.
What if the repair fails after you leave?
You call us, and we return at no charge. Every hinge and post repair we do is covered by the 365-Day Done Right Promise and a written Kingswell Guarantee on the invoice. If the hinge fails or the post shifts inside that year, we correct it for free, including the return visit.
Written by Dean Prescott, Owner at Portcullis Gate Repair Austin, serving Austin.