Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Hornsby Bend, TX
Gate repair in Hornsby Bend comes down to one thing most city gate companies don’t plan for: the ground. The clay soil along FM 969 and the Colorado River bottomlands swells in spring, shrinks in August, and slowly moves every gate post on your property. That means a gate that worked fine in January will be dragging, binding, or failing to close by June. We’re Portcullis Gate Repair, and we fix that. Call us at (254) 280-0629 when your gate stops behaving, and we’ll give you the price before any work begins.
Why Hornsby Bend Homes Are Different
Hornsby Bend isn’t a neighborhood of cookie-cutter lots. It’s a patchwork of manufactured homes on acreage, older farm properties along the river, and newer subdivisions pushing in from the west. That mix changes the gate work we do. On the big lots, we’re often looking at 16-foot and 20-foot driveway gates built for tractors and trailers, not just passenger cars. Many were owner-installed years ago on chain-link posts that were never meant to carry a steel gate, and now the operators are fighting the weight. On the newer streets, builders put in decorative aluminum gates with lighter frames, but the issue is the same: the soil shifts, the posts lean, and the opener binds.
When a gate binds, the motor doesn’t just work harder. It burns out circuit boards, strips gears, and eventually fails. In Hornsby Bend, our technicians check post movement before they do anything else, because a new operator bolted onto a leaning post will fail the same way the old one did. That’s an expensive lesson we’d rather you not pay for twice.
Styles & brands we work with
Our Main Hornsby Bend Services
These are the three jobs we handle most often in Hornsby Bend, and each one has its own page with pricing and local details.
Gate Repair in Hornsby Bend
A gate that sags, scrapes the ground, or won’t latch is a security gap for a property, and on Hornsby Bend’s larger lots it’s also a daily frustration. We repair hinges, weld cracked frames, straighten posts, and replace bent or rusted hardware. On river-adjacent properties, we check bottom rails carefully, because morning fog off the Colorado River accelerates rust on steel frames that look fine from twenty feet away. The repair usually starts with a phone call and a written quote for the full job. Details are on our Gate Repair in Hornsby Bend page.
Gate Installation in Hornsby Bend
Installing a gate in Hornsby Bend means sizing it for the actual driveway, not the one the original builder imagined. Wide entrances, gravel approaches, and fence lines that aren’t square to the road all affect what fits and what lasts. We quote new swing gates, slide gates, and full frame-and-operator packages, and the price you get is the price on the invoice. Because the soil here moves, we spend extra time on post depth and bracing during installation. See Gate Installation in Hornsby Bend for specifics.
Electric Gate Repair in Hornsby Bend
When the gate won’t open from the remote, the keypad is dead, or the motor runs but the gate doesn’t move, you’re dealing with the operator. On solar-powered openers common on Hornsby Bend’s rural lots, summer heat stresses the battery backup and the charge controller, and spring rain can expose wiring that was never sealed properly. We service nine major gate operator brands and carry common parts in the truck, so many electric repairs are finished on the first visit. The full breakdown is on our Electric Gate Repair in Hornsby Bend page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Hornsby Bend
We see a lot of LiftMaster and Mighty Mule openers on Hornsby Bend properties, along with DoorKing and Elite units on commercial and larger residential gates. Our techs arrive familiar with the system on your property, and most common boards, remotes, and limit switches are stocked in the truck. For the full list, see our brands.
Pricing for Gate Company in Hornsby Bend, TX
These are the price ranges we quote most often for gate work in Hornsby Bend. Every quote is written and agreed before work starts.
| Service | Typical range in Hornsby Bend |
|---|---|
| Service call and on-site diagnosis | $75 – $125 |
| Swing gate opener swap (parts and labor) | $650 – $1,450 |
| Slide gate opener swap (parts and labor) | $750 – $1,700 |
| Circuit board replacement | $350 – $850 |
| Limit switch replacement | $175 – $325 |
| Safety sensor replacement | $195 – $425 |
| Hinge replacement (per hinge) | $125 – $300 |
| Gate post straightening | $225 – $575 |
| Welding repair (cracked frame or rail) | $185 – $475 |
| Full standard gate installation (single swing) | $2,200 – $6,500 |
| Full standard gate installation (slide) | $3,500 – $9,500 |
| Complete operator replacement package | $1,200 – $3,200 |
In Hornsby Bend, prices tend to run higher on river-side properties where rust and corrosion add labor, and on the larger acreage lots where gates are wider and frames are heavier. The written price you approve is the price you pay, because that’s the Kingswell way.
See the difference
Before
After
Before
After
Before
AfterNeighborhoods We Serve in Hornsby Bend
We work throughout Hornsby Bend, from the FM 969 corridor down to the streets near the Colorado River and across the newer subdivisions along the western edge of the community. Typical response time for repair calls is same-day or next-day, depending on when you call.
- FM 969 corridor
- Colorado River bottomlands
- Western subdivision streets
- Bastrop County line area
Service Area – Cities Near Hornsby Bend
We’re based in the Hornsby Bend area and also serve neighboring communities, including Austin, TX, Round Rock, TX, Pflugerville, TX, and Leander, TX. If you’re just outside Hornsby Bend, call us and we’ll let you know when we can get a technician to you.
Serving Hornsby Bend, TX - Our Local Coverage Area
We’re based in the Hornsby Bend area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hornsby Bend
For gate repairs, we typically arrive the same day you call, especially if the gate is stuck open or won’t secure. Scheduling is handled from our Austin office, with local crews dispatched to Hornsby Bend. If you need a specific time, we’ll give you a real arrival window and hold ourselves to it.
In most cases, repairs and operator replacements don’t require a permit. New gate installations can, depending on setback rules and whether the gate is automated. We can tell you what’s needed for your specific property before we quote the job. Call (254) 280-0629 and we’ll check.
Yes, almost every gate we service in Hornsby Bend was installed by a previous owner, a builder, or a handyman. We repair and upgrade existing systems all the time. We’ll assess what you have, tell you what’s worth fixing, and give you the written price before we start.
Contact Portcullis Gate Repair in Hornsby Bend
If your gate is acting up, call (254) 280-0629 for a free estimate. We’ll answer, ask the right questions, and schedule a time that works for you. Every job comes with a written price, a real arrival window, and the 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hornsby Bend Customers Say
"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad